I’m eternally inspired by Chanel and basically everything they do. Just like my DIY Chanel perfume clutch, I saw the Chanel perfume iPhone case (below) and knew it was DIY time!
Tools Needed
clear beads -One large bead and a small flat bead (I found mine in the craft section of Walmart)
a clamp and scissors
1. Take your acrylic glue and bond one large bead with one smaller flat bead, you can clamp these together or just let them dry without touching them. Let dry for at least an hour.
2. Once dry, glue these to the top of your clear iPhone case. Hold it in place for a few minutes or until the glue is dry and secure. Set it aside and let the glue dry for at least 12 hours before you start to use it.
3. Print and cut out a perfume label, you can download the one I used or make your own!
4. Using self laminating strips (you could even use clear packing tape) laminate the back of the label and cut excess a few mm from the label edge.
5. Stick the label to the inside of the iPhone case and press down edges until it’s secure.
And you’re done!!!
xo Alana
